I have been toying with the idea of purchasing a keyboard amplifier for the group. The reason for a keyboard amplifier is that I can get three channels, 100 watts, stereo chorus, and echo all in a small package. I have entered a GK spec sheet into a file and have included it below.
Keep On Harpin' George
Gallien Krueger Keyboard Amplification Systems
200MK and 200MP Keyboard Amplifiers
These are the keyboard amps that are really going places. Recording sessions. Live performances. Rehearsals. The 200MK Keyboard Amplifier is designed to bring out the best your keyboard has to offer. And it gives you the flexibility you need for single or multiple keyboard setups. With unmatched sound.
POWER AND FLEXIBILITY
Fully-produced studio-quality sound with 100 watts of power. A two-way speaker system combining a 12" woofer and a 3.5" tweeter. Mono input/ stereo output. Built-in stereo effects. Three channels, each with bass, and treble controls as well as individual chorus and echo controls. A master limiter prevents power amp clipping. And for a full 100 watts per channel stereo, just add the 200MP Powered Monitor.
Both the 200MK and the 200MP can be mic stand mounted with the addition of an optional Mic Stand Kit. And to keep your investment looking and sounding great, not to mentioin making it easier to take with you, fully- padded Road Bags are available.
IN THE STUDIO
Record directly from the amp, in either stereo or mono with the balanced outputs, while the built-in speakers let you monitor your output.
ON THE STAGE
Stereo or mono output goes directly to the PA while you monitor your output.
IN THE REHEARSAL
The 200MK goes anywhere your keyboard can go. And just as easily. You can always have yoru own special sound right at your fingertips.
SPECIFICATIONS
Max Input: 1.5Vrms (200MK) 10Vrms (200MP) Output: 100W into 4 ohm~1% THD 72W into 8 ohm~1% THD Frequency Response: Signal to Noise Ratio: >80dB (referenced to max output power from max input, EQ flat) Active Equalization: q15d~10kHz (200MK only) q15d~80Hz (200MK only) Limiter: Fixed setting, non-switchable (prevents power amp clipping) Input Impedance: Input, 1M ohms Monitor Input, 100K ohms (200MK) Speakers: 1x12" and 1x3.5" (passive crossover) Dimensions: 13.75"W x 15"H x 7.5"D Weight: 24 lbs Footswitch: Controls Chorus (on/off) and Echo (on/off)
