>I would advise that the use of epoxy for mic repair be well thought out. >For example, what if one of the pins of the connector were damaged? >The insert would need replacing, but alas, the screw is epoxied in and >it ain't movin.' Ditto for Shure bullits and the cable connection in the >event of the need to replace the cable. If I understand right, it's just the pipe thingie that has come out off the shaft in the mic. This can be fixed with epoxy quite safely. If it is indeed the pin interior that won't stay in, then the answer lies with the little screw mount thingie. Wouldn't know what to do then........ Replace?