Other web Sites
Harmonica Blues  Harmonica Amps
Harmonica Links Harmonica Pages
• Archives Home
• Years
 · 1992
 · 1993
 · 1994
 · 1995
 · 1996
 · 1997 		 · 1998
 · 1999
 · 2000
 · 2001
 · 2002
 · 2003
 
Web HarpL
Ebay Searches:
Amps:
Microphones:
Effects:
Harmonicas and Gear:
Harmonica Music and Instruction:

 

 

Harp-L Archives

[Previous Message] [Next Message]
[Next in Thread]
[Start of Thread] [End of Thread]

From: Jeff Hale
Date: Sat, 12 Jun 1999 07:52:48 -0700
Subject: Before I cut!

I'm about to cut into my favorite Shure 520D and want to do so with
confidence. FJM gave me the following advice, which I believe, I just want
to be reassured that others have had positive outcomes as well. FJM states
"If the mic uses all three wires inside the shell it's wired dual.
Those 2 little screws on the side of the mic hold the cartridge in.
Remove the cartridge to see. To wire it single high impedance you cut
the red wire and insulate the end then wire the blue wire to the shield
and the black wire to the tip of the 1/4" plug. If you're not sure
which cord wire is tip just take the sleeve off the plug end of the jack
and look."

Should I go ahead and cut?

Jeff Harpdog Hale